How to Achieve Perfect Acoustics in Your Car

achieving the perfect car acoustics

  • Create Balance
  • Insulate Car Cabin
  • Position Speakers
  • Use Sound Processor or Amplifier
  • Tune Up Audio System
  • FAQs

Acoustics in a car cabin pertains to its ability to accurately reflect sound waves, guaranteeing a clear and crisp listening experience. In other words, acoustics is how easily you can hear music, conversations and other sounds while driving. Aside from that, acoustics also aid in reducing external noises. Therefore, achieving perfect acoustics secures a significant position when it comes to making your journey peaceful.

For your convenience, here we have mentioned some ways of achieving the perfect car acoustics.  

How to Achieve Perfect Car Acoustics

Following are the steps to achieve perfect car acoustics. 

Create a Balance of Car Material

Materials used in a car cabin can significantly affect the acoustics. Hard materials such as windows, windshields and sunroofs are better at reflecting sound. However, excess of these can disrupt the overall acoustic balance within the cabin. 

On the other hand, soft materials like leather seats, cushions and stuffed toys used for decoration absorb sounds. Therefore, achieving the right balance is key for an optimal acoustic experience.

Insulate Car Cabin

Achievement of perfect acoustics is nearly impossible without car cabin insulation. After insulation, not only are acoustics enhanced, but external noises and vibrations inside a cabin are also reduced. For soundproofing cars, different processes are used, some of which are mentioned below. 

  • Diffusing: In diffusing, panels and surfaces are used, which scatter sound waves, resulting in better sound quality. Usually, the panels are installed on doors, roofs and floors. 
  • Deading: Sound deading is preferred for reducing external sound and vibrations. Mats and sprays are used in sound deading. 
  • Bass Traping: Bass traps are used to absorb low-frequency sound, preventing them from bouncing back. 
adding insulating material on the car door
Insulation helps in achieving perfect acoustics by reducing external noise and vibration

Select & Position Speakers Correctly

Cars have built-in stereo speakers varying as per car body type and other requirements. While car owners have the option to install aftermarket speakers, it’s essential to ensure compliance with laws and regulations. That said, here are some speakers available in the market that you can opt for to improve sound quality in your car. 

  • Woofers: These are full-size speakers that produce low-frequency sound and bass. Due to their larger side, woofers are often installed on the doors, rear side of the car or under the seats.  
  • Midrangers: As evident from the name, these are mid-size speakers that majorly control the sound spectrum.
  • Tweeter: These types of speakers are used for high-pitched sounds and are placed at ear level.

If you are interested in buying these speakers, here is the list of car audio shops in Dubai.  

Opt for a Sound Processor or Amplifier

Sound processors and amplifiers are two different types of audio devices, but both are used to enhance sound quality. Sound processors increase the quality before it reaches the speaker. Whereas an amplifier is known for maintaining the sound quality at any volume level.

This is why, for getting the best out of your audio system, it is recommended to install these devices. If you have a limited budget, browse through these used auto accessories for sale in the UAE and buy audio devices as per your budget. 

Tune Up the Audio System

Tuning up the built-in audio system and car stereo speakers is essential for achieving perfect car acoustics. Tuning up or calibrating the system includes balancing the fade, time alignment, volume, bass and fade, resulting in a harmonious sound. 

If you have a problem adjusting it, seek assistance from a tone generator or a sound level meter to adjust the system properly. 

calibrating the car’s infotainment system
Calibrating the audio system helps in enhancing sound quality

Maintain Audio System Regularly

Alongside all the steps mentioned above, maintenance is also necessary. Regularly cleaning, repairing and replacing (if necessary) all the car audio system parts is necessary to avail of its optimum performance and increase its lifespan. Aside from the audio system, the car battery, alternator and fuses should also be working properly, providing the required current to the parts. 


What is car acoustics?

The car acoustics refers to how sound interacts (reflect & travel) with the surfaces inside the car cabin. 

Is it necessary to install sound insulation for better acoustics?

Yes, insulation is necessary to reduce external noises and vibrations, leading to perfect acoustics.

Will acoustics increase if I add too many soft surfaces?

No, soft surfaces absorb sound, which is necessary for acoustics, but too many soft surfaces will disrupt the balance. 

This was all about achieving the perfect car acoustics. The car’s audio system is a source of entertainment for the occupants, making the journey pleasant. Although after-market car audio systems are present, the built-in system is perfectly designed for each car. Therefore, whether you are planning to buy new or used cars for sale in the UAE, it is recommended to check its audio system. 

Besides, here are some more reasons to upgrade your car audio system.

Stay tuned to dubizzle’s auto blog for more information on audio systems.


Common Reasons Electric Car Won’t Start

Electric Car Not Starting

  • Charge
  • Key Fob
  • Battery
  • Charging Station
  • Overheating
  • Software
  • FAQs

A malfunctioning Electric Vehicle (EV) can be a nightmare for many, especially when it is not starting. While the problem of electric vehicles not starting is not a common occurrence, it can happen due to specific reasons. However, knowing these reasons can help drivers identify the potential cause and resolve it without hassle. 

Let’s take a closer look at some of the core reasons for electric cars not starting and whether you can fix them at home or not.  

Why Electric Cars Won’t Start Sometimes

The following are the potential reasons why your electric car is not starting. 

Insufficient Charge

A primary reason for electric vehicles not starting is insufficient charging. This is why it is suggested to keep a regular check on the car’s battery and charge it regularly. If the problem of a low battery is consistent, opt for the EV range extenders to enhance the battery efficiency. 

Besides, when using a charging station, follow the EV charging etiquette to avoid any hassle. 

electric car battery system
Insufficient battery charge is one of the most common reasons that your electric car is not starting

Key Fob Issues

A majority of modern vehicles have keyless ignition systems, including EVs. In keyless ignition, a key fob is used to access a car and start the vehicle. Sometimes, the key fob malfunctions, causing difficulty in starting an EV. 

To check the key fob is working, stand at a distance of one foot from the car and unlock the car. If the car responds by beeping or flashing a light, the key fob is working. However, if not, first replace the fob’s battery, and if it doesn’t respond even after the replacement, contact the manufacturer. 

Faulty Car Battery

EVs completely depend on their batteries for energy and even the slightest faults in the batteries can cause significant issues in their working. Despite having enough charge, a malfunctioning battery might become a reason for an electric vehicle not starting. 

The battery system of an EV can malfunction for multiple reasons, including extreme temperature, wiring issues, problems with the battery management system and excessive charging. To check if an EV is not starting due to a malfunctioning battery, check the dashboard. If the dashboard is on and it is showing accurate information about the charge, then the battery is working properly. However, if it is malfunctioning, it is recommended to consult with a professional. Here is how to get your car to a mechanic if it won’t start. 

Charging Station Malfunction

A charging station includes multiple components, including the charger, charging cable and charging connections. A fault in any of them will lead to improper charging, causing difficulty in starting an EV. In certain cases, the car is plugged in and charged for the required time, but it won’t start even after that. This indicates issues in charging cable; to identify it, look for physical damages. However, if you are unable to detect any physical damage, it is recommended to seek professional assistance. 

Another situation is when the charging station is not compatible with the EV. Every charging station has a different voltage output. Opt for the charging station in accordance with your car’s voltage requirements. If you own a Tesla, here are some Tesla charging stations in the UAE that you can visit. 


Electric vehicles can encounter battery system overheating despite the presence of EV cooling systems. In extreme cases, a dashboard warning light signals the overheating concern. Look out for signs such as sudden power loss, burning odours and cars not starting, as these can also indicate overheating issues.

EV dashboard
When an EV is overheated or out of charge, the dashboard starts illuminating warning lights

Software Glitches

Some EVs have an automatic update option allowing them to update the car software where needed. However, if the software is not updated completely, the car will not start. To avoid this situation, it is recommended to turn off the automatic update option in your car. 


Why is my electric car suddenly not starting?

A sudden stop in the car usually occurs when charging ends. Here is what happens when an electric car runs out of battery. 

Why is my car not starting if the battery isn’t dead?

If an electric car is not starting and the battery is completely functional, it can be due to overheating. Park your car under a shade and let it rest for a few minutes. 

Can I jumpstart an electric car?

No, electric cars can not be jump-started, and it is highly recommended NOT to attempt jump-starting an electric car. 

These are all the reasons why your electric car is not starting and causing trouble. The inception of EVs has reshaped the future of mobility and the automobile landscape. The advanced technological features and eco-friendliness of these vehicles make them stand apart. That said, if you are also interested in availing these features, browse through these used cars for sale in the UAE and choose from an array of options. 

Stay tuned to dubizzle’s auto blog for more tips to troubleshoot electric car engine shutdowns.


All About Hyundai Multi-Terrain Controller in Santa Fe

  • Drive and Terrain Mode Selection
  • Santa Fe – Defining Excellence
  • FAQs

In the pursuit of elevating the driving experience, Hyundai has unveiled a groundbreaking feature in its Santa Fe SUV – the Terrain Mode Selector. This innovative technology also represents a significant stride forward. It also showcases Hyundai’s dedication to providing a superior driving experience across a spectrum of challenging terrains. Let’s delve into the intricacies of the Hyundai Multi-Terrain Controller. We will also explore how it positions the new Santa Fe as a trailblazer in the competitive SUV market.

Hyundai Multi-Terrain Controller for Unmatched Performance

The Terrain Mode Selector isn’t merely a novelty; it’s a paradigm shift in the SUV landscape. The new Terrain Mode Selector feature is also seamlessly integrated with Hyundai’s HTRAC four-wheel drive system performance technology. Moreover. the technology empowers drivers to optimise their driving performance on different terrains. Some of them include sand, snow and mud, with a simple turn of a rotary knob. With its name derived from the synergy of ‘Hyundai’ and ‘traction,’ HTRAC autonomously directs torque to the front and rear wheels. Therefore, the result is a consistently comfortable and reliable journey, redefining expectations across various terrains.

Drive and Terrain Mode Selection in Hyundai Multi-Terrain Controller

Hyundai Multi-Terrain Controller for Unmatched Performance
The Hyundai Multi-Terrain Controller offers unmatched performance while off-roading

Conveniently situated in the centre console, the rotary knob of the new Santa Fe offers drivers a nuanced selection between four distinct drive modes and three terrain modes. A straightforward push of the button in the knob’s centre enables drivers to seamlessly transition between drive and terrain modes, with real-time updates displayed on both the digital cluster and the AVN (Audio, Video, Navigation) screen.

Drive Modes

  • Comfort: Balancing regular driving performance optimally, providing a smooth and comfortable ride.
  • Sport: Elevating performance levels with adjustments to steering effort, gear shift points and throttle response for a more dynamic driving experience.
  • Eco: Prioritising fuel efficiency for eco-conscious driving through adjustments in acceleration, gear shift points and air conditioning performance.
  • Smart: Intelligently adapting between Eco, Comfort and Sport, the Hyundai smart drive mode is based on the driver’s unique style and preferences.

Terrain Modes

  • Snow: Minimising wheel slip to enhance control and traction in slippery and snow-covered road conditions.
  • Sand: Optimising takeoff and performance on soft and high-resistant surfaces for a smoother driving experience.
  • Mud: Enhancing performance on slippery and uneven terrains by adjusting engine torque, gear shift patterns, traction control and all-wheel drive torque distribution.

The New Santa Fe – Defining Excellence

The new Santa Fe 2024
The integrated control in Santa Fe new terrain mode selector offers safe driving

As per Santa Fe history, the fourth generation boasts advanced technology, safety and improved torque application. Also, Hyundai’s unwavering commitment to continuous improvement and innovation takes centre stage with the new Santa Fe. As the first Hyundai SUV equipped with the Hyundai Multi-Terrain Controller, this flagship model establishes a new benchmark for technology, convenience and adaptability. The latest Santa Fe is one of the popular hybrid cars to look for in 2024.


What does the Terrain Mode Selector in the Hyundai Santa Fe do?

The Terrain Mode Selector optimises your driving experience by adjusting settings for different terrains, such as sand, snow and mud. It also enhances control and comfort by tweaking engine torque, gear shifts and traction control.

How does HTRAC technology work with the Hyundai Multi-Terrain Controller?

HTRAC is Hyundai’s four-wheel-drive system. Paired with the Hyundai Multi-Terrain Controller, it autonomously shifts torque between front and rear wheels, ensuring a comfortable and reliable drive across diverse terrains.

How does the Hyundai Multi-Terrain Controller contribute to fuel efficiency?

The Eco-Drive Mode, coupled with the Terrain Mode Selector, optimises acceleration, gear shifts and air conditioning for fuel efficiency and eco-friendly driving.

Is the Terrain Mode Selector exclusive to the new Santa Fe?

Initially, yes. However, Hyundai plans to integrate this technology into future SUV models, emphasising its commitment to advanced driving features across its SUV lineup. Moreover, Santa Fe is one of the popular SUVs to buy under 100k in the UAE.

Does the 2024 Santa Fe have a Terrain Mode Selector?

Yes, besides Multi Terrain Mode Selector, the 2024 Santa Fe features a range of modern safety features such as Parking Distance Warning and Remote Smart Parking Assist.

The Multi-Terrain Control Hyundai Santa FE is not a mere technological addition; it’s a transformative feature that enhances the overall driving experience. Moreover, as we anticipate the evolution of Hyundai’s SUV lineup, the Hyundai Multi-Terrain Controller sets a high standard for future models, promising a more dynamic and adaptive driving experience across diverse terrains. With the new Santa Fe, Hyundai proves once again that innovation and versatility are integral to providing drivers with a reliable, advanced and adaptable SUV for all their journeys.

After knowing about this interesting feature, if you are looking for a used Hyundai Santa Fe for sale in the UAE, check out the listings here. 

You can also explore a range of other used cars for sale in the UAE here.

To know more about interesting car features, stay tuned to the dubizzle car blogs.


Side Mirrors Not Working: Causes and Fixes

  • Blown Fuse
  • Malfunctioning Side Mirror Motor 
  • Faulty Side Mirror Switches 
  • Car Computer Problems
  • FAQs

A car’s power side mirrors contribute to driver safety by minimising blind spots and improving overall visibility. However, when these side mirrors cease to function, they become a source of frustration and compromise safety on the road. Various factors contribute to the malfunction of power side mirrors, ranging from electrical issues to mechanical failures. 

Here, we have gathered the common reasons for side mirrors not working and how to fix them. They are as follows: 

Car’s Power Side Mirror Not Working and How to Fix Them 

Here are some of the most common reasons for side mirrors not working and their fixes. 


When a car’s side mirror ceases to function, it is usually because of a blown fuse within the vehicle’s electrical system. The side mirror uses electrical power to operate its motors and heating elements. A blown fuse occurs due to an excess of electrical current through the circuit, causing the fuse to break and interrupt the circuit. This interruption results in a malfunction in the mirror’s wiring.


To address this issue, first consult the vehicle’s manual to locate the car fuse box and identify the specific fuse for the side mirrors. Once found, replace the blown fuse with a new one of the correct rating. It’s crucial to investigate the root cause, which may involve checking the mirror’s wiring for any faults or short circuits.


Reasons for Side Mirrors not Working like faulty motor
A faulty motor leads to non-operational side mirrors in a car

A malfunctioning side mirror motor can lead to non-operational side mirrors in a car. The mirror motor is responsible for adjusting the mirror’s position. The motor may encounter issues due to factors such as wear and tear, electrical faults or motor failure. 


To fix a malfunctioning side mirror motor, first, check the fuse in the vehicle’s fuse box. If the fuse is fine, inspect the mirror switch for issues. If the switch is operational, examine the wiring for damage and address any problems found. However, if the problem persists, the side mirror motor may need replacement. 

Malfunctioning Side Mirror Switches

Non-operational side mirrors often result from malfunctioning mirror switches. These switches, typically located on the driver’s side, control the mirror adjustments. When these switches fail due to wear, electrical faults, or damage, it becomes difficult to adjust wing mirrors correctly. 

In addition, signs of a failing mirror control switch include unresponsive or erratic mirror adjustments or complete functionality loss.


Addressing issues with the mirror switches, including replacing damaged components or the entire switch assembly, is crucial for restoring proper mirror functionality. Besides, regular checks and prompt resolution of such electrical issues contribute to sustained reliability in the operation of side mirrors.

Diagnose Side Mirror Problems using car computer
It is advisable to inspect these issues and replace the damaged components at the earliest


Another reason for side mirrors not working is software or control module issues. In modern vehicles, car computers manage various functions, including mirror operations. Malfunctions in these modules, often due to software glitches or electronic component failures, lead to the loss of mirror functionality.


In such cases,  a software update is required, while in others, a malfunctioning module might need replacement. Moreover, you can opt for dubizzle car inspection services for a thorough vehicle checkup. 


Why is My Side Mirror Not Working?

Non-functional side mirrors occur for various reasons, including blown fuses, faulty mirror switches, or malfunctioning mirror motors.

How can I troubleshoot a faulty mirror switch?

If the mirrors do not respond to the switch, inspect the switch on the driver’s side for wear, damage or malfunction. Replacing the switch or its damaged components may restore proper mirror functionality.

Could wiring issues be causing my side mirrors to malfunction?

Yes, damaged or loose wiring can disrupt the electrical flow to the mirrors. 

All in all, these were the root causes and different methods to diagnose side mirror problems. Side mirrors are a crucial element of vehicle safety. That is why, when buying a used car in the UAE, make sure that side mirrors and other components are functioning properly. Morever, to maximise visibility and drive safely, here’s how to adjust car mirrors properly.

For more on various car problems, their diagnoses and solutions, keep reading dubizzle’s cars blog. 


All About the Different Car Headlight Designs

Car Headlight Designs

  • Pop up Headlights
  • Round Headlights
  • Rectangular Headlights
  • Shaped Headlights
  • Clamshell or Hidden Headlights
  • FAQs

A headlight is an element that tends to both safety and aesthetic aspects of a car. From the design point of view, this car part has evolved significantly over the decades. Today, we see several car headlight types crafted in different layouts. From sleek lines to traditional ovals, car headlights have embraced several designs. 

Here, we have noted down some of the most common, both old and new, car headlight designs. Let’s move forward to their details.  

Types of Car Headlight Designs 

Car headlights have evolved beyond functional necessities. There is a wide array of different headlight types crafted in various layouts, all adding to the vehicle’s appearance. With this in mind, let’s go through the different types of car headlight designs. 

Super-Slim Headlights

Super-slim headlights mark a notable advancement in automotive design. These sleek and compact lighting units enhance the aesthetics of a vehicle and also embody efficiency and innovation. Moreover, this headlight design gives a streamlined appearance. These headlights also have car aerodynamic benefits, promoting fuel efficiency and reduced drag. 

super-slim car front headlight designs
Super-slim headlights strike a balance between form and function

Super-slim headlights represent a balance between form and function. Notable examples of models adorning such headlights include the latest Cadillac Lyriq Al Awael, Mitsubishi Outlander, Bugatti Centodieci and Hyundai Kona. 

Pop up headlights 

Pop-up headlights were once a distinctive feature, popularised in the latter half of the 20th century. These headlights could retract into the car’s body when not in use. They provided an aerodynamic advantage while offering a sleek and futuristic appearance. 

vintage car headlights designs like the pop-up
Pop-up headlights became synonymous with sporty cars

This car front headlight design emerged during an era of automotive experimentation and became synonymous with sporty and high-performance vehicles. It became one of the coolest car headlight designs of its time. Besides, many well-known models like the Porsche 923, Chevrolet Corvette and Pontiac Fiero boasted this design. Even in the Toyota Supra history, pop-up headlights became a prominent feature of the third generation. 

Long Horizontal headlights 

Long horizontal headlights represent a modern trend in automotive design. Unlike the pop-up headlights of the past, this approach prioritises a sleek, streamlined appearance. Cars such as the Tesla models feature long, horizontal headlights that stretch across the front of the vehicle. 

led car headlights Designs in long horizontal layout
This headlight design provides ample illumination

This design choice allows for incorporating advanced lighting technologies, such as projector or reflector headlights. In addition, these headlights serve a practical purpose by providing ample illumination, ensuring safety without compromising on style.

Round headlights

Round headlights are like a timeless design that takes us back to when cars first started looking elegant. They’re simple circles of light and even today, lots of cars use this classic style. This vintage car headlight design lights up the road and makes a car’s front part look neat and put together. 

round car headlight designs
This traditional headlight design is commonly found on Bentley cars like the Mulsanne

Moreover, iconic car models like the Bentley Mulsanne adorned this design. Other prominent examples include Bentley Continental GT, MINI Cooper electric 2024, Volkswagen Beetle and earlier models of the Ford Mustang. 

Oval-shaped headlights

Oval-shaped headlights are a variation from the more traditional round or circular headlights. As the name suggests, they take on an elliptical or oval form. Oval-shaped headlights are commonly associated with vintage cars. However, they are more difficult to manufacture as compared to other car headlight designs. 

Coolest Car Headlight Designs like oval-shaped headlights
Oval-shaped headlights are a staple feature of Porsche models

As for which models are known for this design, the history of Porsche has enough evidence. The oval-shaped headlights on the Porsche 911 996 served as a bold departure from convention. Moreover, the Porsche Panamera 2024 can be seen flaunting this headlight layout with a low roofline.  

Rectangular Headlights 

Rectangular headlights are a prevalent headlight type featured on a diverse array of vehicles. These include classic cars, SUVs and even pickup trucks. Known for their straightforward, rectangular shape, these headlights offer several advantages over alternative designs like beam shaping and protection against road debris. 

car front headlight designs like rectangular headlamps
This design gives a robust look to the vehicle

Vehicles with rectangular headlights include classic cars like the Jeep CJ, Ford Mustang and Chevrolet Camaro, as well as modern SUVs such as the Toyota Land Cruiser or Nissan Patrol. Modern trucks like the Ford F-Series, Chevrolet Silverado and Ram 1500 also feature this bold design.


Shaped headlights are an innovative addition to the front end of a car. They are divided into the following categories: 


U-shaped headlights, as the name incurs, take on a distinctive U-shaped design, giving the ride a  futuristic look. This headlight style is characterised by a continuous, curved light signature that forms the shape of the letter “U”.

An example of this design can be found in certain models of Audi, such as the Audi e-tron. These headlights not only add to the car’s visual appeal but also serve as a recognisable signature for Audi’s electric vehicle lineup.


new L-shaped car headlights designs on luxury models
L-shaped headlights are often found on high-performance models

L-shaped headlights feature an angular design that resembles the letter “L”.This sports car headlight design is often associated with luxury and high-performance car models. An example is the BMW 7 Series, where L-shaped headlights are a distinctive element of the car’s front-end design. These headlights have remained a notable feature throughout BMW Motorsports history. 

Clamshell or Hidden headlights 

Clamshell headlights and hidden headlights share the common feature of being concealed when not in use. But, they exhibit distinct design mechanisms.

Car Headlight Design types like clamshell
This type of headlight became a notable feature on Buick Riveria

Clamshell headlights, often featured as hinged panels, open and close to reveal the headlights. Popularised on classic cars from the 1960s and 1970s like the Buick Riviera and Ford Thunderbird, they are favoured for their ability to confer a sleek look to the vehicle.

On the other hand, hidden headlights serve as a broader category encompassing various designs where headlights are concealed when not needed. This includes clamshell headlights and other types that may be hidden behind retractable covers or car grilles. 

Hidden headlights, popular in the 1960s and 1970s, remain a design choice in modern cars like the Chevrolet Corvette and the Toyota Prius. This design element is used to give the vehicle a more aggressive and sporty appearance.


What are the common types of car headlight designs?

Common types include round, rectangular, U-shaped or L-shaped headlights. Some cars also feature designs like the clamshell or hidden headlights.

Which car brands are known for unique headlight designs?

Certain car brands like Audi, BMW and Porsche are renowned for incorporating unique headlight designs in their models.

Do headlight designs impact a vehicle’s aerodynamics?

Yes, headlight designs, especially streamlined or hidden options, contribute to a vehicle’s aerodynamics, potentially improving fuel efficiency and reducing wind resistance.

This concludes our list of different car headlight designs. From streamlined designs to rugged boxy layouts, car headlights have evolved significantly. Since driving at night requires adjustment of lights, the modern designs incorporate auto-levelling headlights to improve visibility. Moreover, if you are looking for a new ride with a distinct front fascia, here are used cars for sale in the UAE that offer a myriad of choices. 

For more on different car parts, their types and designs, keep reading dubizzle’s cars blog. 


Causes and Symptoms of a Bad Flywheel

flywheel is an integral part of a car engine

  • Symptoms
  • Causes
  • Replacement Cost
  • FAQs

Every manual transmission vehicle relies on a crucial yet often overlooked component known as the flywheel. Acting as a mechanical powerhouse, the flywheel ensures smooth engine operation and seamless gear changes. However, like any other vehicle part, flywheels can deteriorate over time, leading to a range of symptoms that shouldn’t be ignored. Let’s explore the common causes and symptoms of a bad flywheel, shedding light on the importance of timely diagnosis and replacement.

Symptoms of a Bad Flywheel

Knowing the signs and symptoms of a bad flywheel enables you to promptly address the issue by opting for a new or used replacement flywheel. This proactive approach ensures your safety while driving. Here’s what to keep an eye out for.

Slipping Gears

One prominent sign of a failing flywheel is gear slippage. If you notice that the engine speed (RPM) increases rapidly without a corresponding increase in ground speed when shifting gears, it could indicate a slipping flywheel. This may be akin to a slipping clutch and if left unaddressed, it can damage the clutch over time. This is why, you must keep an eye on the signs of bad car clutch.

Difficulty Changing Gears

A severely damaged flywheel might hinder your ability to change gears and your car won’t go into correct gear. This symptom suggests extensive wear and other transmission components may also be compromised. In extreme cases, the vehicle may become undriveable, emphasising the urgency of addressing the issue promptly.

Burning Smell

Damaged teeth on the flywheel can cause car starting issues
A malfunctioned flywheel can cause burning odour

An unusual burning smell inside the cabin could be attributed to several issues and a bad flywheel is one potential culprit. Excessive friction in the clutch due to oil or grease contamination on the flywheel’s friction surface can generate heat, leading to a noticeable burning odour.

Unable to Start or Inconsistent Starts

Damaged teeth on the flywheel can impede its engagement with the starter motor, resulting in difficulties starting the vehicle. Inconsistent starts or outright failure to start are clear indicators of a potential flywheel issue and prompt attention is crucial to avoid further complications.

Engine Stalling

A lightweight aftermarket flywheel may lead to easier vehicle stalling and a rough idle. The rapid drop in engine speed, especially with very light flywheels, can cause stalling even when pushing the clutch in. This symptom emphasises the importance of selecting a flywheel appropriate for the car’s mechanical components.

Vibrations of the Clutch 

As a flywheel degrades, vibrations transmitted through the clutch or multi-plate clutch system may become pronounced. Over time, excessive runout can warp the flywheel’s surface, contributing to these vibrations. Suppose the flywheel has been subjected to overheating or prolonged use with a worn-out clutch. In that case, irreversible damage may occur, manifesting as a bluish colour, hairline cracks, or smeared metal on the surface.

Engine Vibrations with Clutch Engaged

An unbalanced flywheel can induce vibrations throughout the powertrain, even when the clutch is engaged. Proper installation, torque specifications and balancing are essential to prevent the flywheel from disintegrating or coming loose while driving, which could pose serious safety risks.

What Causes Damage to a Flywheel

Several factors can contribute to the damage of a flywheel
Contamination and overheating can cause due to a faulty flywheel

Several factors can contribute to the damage of a flywheel. Here are some common causes:

Friction and Wear

Continuous engagement and disengagement of the clutch lead to friction between the flywheel and the clutch disc. Over time, this friction can wear down the surface of the flywheel, affecting its performance.


Exposure to oil or grease can contaminate the flywheel’s friction surface. This contamination reduces the grip between the flywheel and the clutch, potentially causing slipping and overheating.


Excessive heat generated during aggressive driving, prolonged use with a slipping clutch, or other factors can overheat the flywheel. This heat can lead to warping, discolouration and the formation of cracks on the flywheel’s surface.

Clutch Issues

A worn-out or damaged clutch can impact the flywheel’s performance. Clutches that are worn down to the rivets can cause significant damage to the flywheel over time.


Improper or unsafe driving techniques, such as riding the clutch or aggressive shifting, can contribute to premature wear and damage to the flywheel. Moreover, operating the vehicle at consistently high RPM levels, especially bad manual car driving habits can accelerate wear and contribute to flywheel damage.

Imbalanced Components

If the flywheel is not properly balanced or if there are issues with the clutch components, it can lead to vibrations and increased stress on the flywheel, resulting in damage.

Teeth Damage

The teeth on the flywheel that engages with the starter motor can get damaged over time. This damage can make it difficult for the starter motor to engage and your car may take longer to start.

Incorrect Installation

Improper installation of the flywheel or related components can lead to misalignment, imbalance, or inadequate torque, all of which can contribute to flywheel damage.

However, regular maintenance, proper driving techniques and addressing clutch issues promptly can help mitigate some of these factors and prolong the life of the flywheel.

Flywheel Replacement Cost in the UAE

The cost of replacing flywheel depends on the repair shop
The new flywheel price starts from AED 1,000

The cost of replacing a flywheel varies based on the vehicle’s make and model. The price of a car flying wheel starts from AED 1,000. However, the labour cost depends on the car service providers. Considering the interconnected nature of the components, it’s advisable to replace related parts such as the clutch, clutch fork and rear main seal during the flywheel replacement.

Can You Drive with a Bad Flywheel

While it’s technically possible to drive with a bad flywheel, it’s not advisable. The flywheel plays a crucial role in smoothing out power transfer from the engine to the wheels. Any issues with the flywheel can have a ripple effect, causing damage to the clutch components, crankshaft and even the engine.

Even if the damage seems minor, driving with a bad flywheel can lead to more severe and costly problems in the future. If you are unsure about your flywheel’s condition, it’s wise to have it inspected by a trusted professional. They can assess the situation and advise whether a flywheel replacement is necessary.


How much does a flywheel cost in the UAE?

The starting price of a flywheel in the UAE is between AED 1,000 to AED 1,300.

How do I know if my car’s flywheel is bad?

You can identify a bad flywheel when vibrations intensify and transmit to the pedal. If you are experiencing issues with flywheel vibrations, you may notice an exacerbation of the problem during gear changes or acceleration. As the underlying issue progresses, you might also detect vibrations around the pedal area, signalling a potential deterioration in the flywheel’s condition.

What does a bad flywheel sound like?

A faulty flywheel can produce rattling, clanking, whirring, grinding, clicking, tapping, or squealing noises, depending on the specific issue. Some of them include loose bolts and damaged teeth. If you suspect a problem, consult a mechanic for proper diagnosis and repair.

This is all about the causes and symptoms of a faulty flywheel. Understanding the causes and symptoms of a bad flywheel is crucial for maintaining the optimal performance and safety of a manual transmission vehicle. Regular inspections, prompt diagnosis and timely replacements are key to preventing further damage and ensuring a smooth driving experience. If you notice any of the mentioned symptoms, consult with a qualified mechanic to address the issue before it escalates.

When you plan to buy a used car in the UAE, make sure you take a test drive and check for any signs of a bad flywheel. This will help you avoid replacement costs.

Besides, you can also check these popular SUVs with manual transmission for your next purchase.

Keep yourself informed by following the car blogs on dubizzle for additional tips and insights.


Ways to Reduce Vehicle Suspension Bounce

Reducing vehicle suspension bounce

  • Causes of Vehicle Bounce
  • Ways to Overcome
  • FAQs

A smooth car ride requires stability and control. While good driving habits ensure control, properly operational vehicle components ensure stability on the road. Speaking of stability in cars, the suspension system plays a key role in this regard. Problems in the car’s suspension system can lead to issues like bouncing when driving. Driving with such issues poses a threat to safety and also leads to premature deterioration of parts. That said, we have compiled a list of some methods for reducing vehicle suspension bounce to ensure a safe ride.

Causes of Vehicle Suspension Bounce

The suspension system ensures a smooth and stable ride. Modern times have witnessed the introduction of different car suspension types, however, the primary function remains the same. Lack of maintenance or damage in the suspension system directly affects a car’s performance.

Moreover, it is unsafe to drive with a damaged suspension system. Before learning the ways of reducing vehicle suspension bounce, let’s take a look at what causes this problem in the first place.


change the car's shock absorbers for Reducing vehicle suspension bounce
Damaged or bad shock absorbers can be the cause of a vehicle bouncing during driving

Shock absorbers in the suspension system ensure stability by limiting vehicle movement. Additionally, these help to minimise vehicle assist with braking. Problems in the car suspension shock absorbers may lead to bouncing when driving.


Struts hold the tyres in position and provide a braking system and steering support as needed. Additionally, struts connect multiple suspension system parts and aid with aligning. In case of bad or broken struts, the suspension system fails to provide stability during rides. Consequently, this prompts the vehicle to bounce during a ride.


Car tyres are instrumental for a smooth ride. Additionally, the different car tyre types allow drivers to opt for the most appropriate kind based on the vehicle and even climatic conditions. Damage on the tyre’s sidewall or cupping can also result in a bumpy ride.


old or damaged steering wheels lead to issues like lack of handling and stability
Problems in the steering wheel can also lead to bumpy rides

The different car steering wheel types come with various features. However, the primary function remains the same for all types. Bouncy rides can often be a result of a faulty steering wheel system.


Worn-out or damaged tyres are prone to air leakage. In such a case, tyres can lose pressure during a drive or even in a stationary position. Inadequately gauged tyres more often than not lead to bumpy rides. Moreover, driving with such tyres remains a serious safety threat.


Poor wheel alignment can be the root cause of a car bouncing during a ride. Bad car wheel alignment causes disruptions in the springs’ position. Consequently, the wheel’s camber angles become more susceptible to damage. Moreover, poor wheel alignment can cause serious harm to a vehicle’s suspension system components.


Ball joints work as a pivot between a car’s suspension and the wheels. These contribute to smooth movements in the car’s suspension system. Damaged or worn-out ball joints prevent a vehicle from maintaining a straight path. Additionally, bad ball joints cause bumpy and uneven rides.


for Reducing vehicle suspension bounce , avoid driving on potholes
Driving on poor condition roads makes a car bounce and can also damage to the vehicle

A bumpy ride may also be caused by poor driving conditions. For instance, off-road terrains or roads with potholes. With such conditions, the problem is with the road rather than any car component. However, if the problem persists on a smooth road, it’s best to inspect the components for damage.

Methods of Reducing Vehicle Suspension Bounce

These are all the possible causes of a vehicle bouncing during driving. It is important to identify the car’s suspension system component causing the issue. That said, let’s now take a look at the ways to reduce vehicle suspension bounce.


Struts and shock absorbers are the most common reasons behind vehicle bounce. Diagnose the vehicle suspension and look for any signs of damage to these components. Replace the components at the earliest to avoid further deterioration. Additionally, check out this comparison between struts vs shocks to get a better understanding of these components.


be sure to get wheel alignment and balancing to avoid bumpy rides
Wheel alignment and balancing ensure a smooth ride and prolong tyres’ running life

Ensure wheel alignment and balancing to avoid bumpy rides. A good wheel alignment ensures that springs do not move from their respective positions.


One of the most effective ways of reducing vehicle suspension bounce is to inflate the tyres properly. In addition to bumpy rides, over and underinflation can often lead to other problems. For instance, premature deterioration of car components.

Therefore, inflate tyres properly as per the recommended PSI. Moreover, know the reasons car tyres lose pressure and try to avoid them.


If the bouncing problem persists even after wheel alignment and inflation, it is better to change the tyres. Go for premium quality tyres as they are better equipped to enhance handling and safety. Consequently, high-quality tyres also help with reducing car suspension bounce.


let a mechanic check the car suspension system to diagnose issues
Have a professional take a look at the vehicle to identify the faulty parts in the suspension system

If all the above-mentioned components are in pristine condition and the car still bounces while driving, the problem may lie elsewhere. Check the car suspension system and look out for worn-out or damaged components.

Check the upper and lower camber bushings and the ball joints. Replace the damaged parts to effectively decrease car suspension bounce.


Why Does My Suspension Feel Bouncy?

Several factors can be the reason behind the bouncy feeling in a car. For instance, damaged shock absorbers, struts, and ball joints. Additionally, worn-out tyres or bad wheel alignment can also lead to bouncy rides.

How to Make a Car Less Bouncy?

Bouncing problems in cars are often related to the suspension system. Therefore, be wary of car suspension problems and fix them as soon as possible. Additionally, an effective way of reducing vehicle suspension bounce is to check and replace the struts, shock absorbers and ball joints. Moreover, get a wheel alignment and use properly inflated tyres.

learn the methods of Reducing vehicle suspension bounce and ensure a smooth and stable ride
Overcome the bumpy rides issues and enjoy a smooth driving experience

These are all effective ways of reducing vehicle suspension bounce. The vehicle suspension plays a key role in ensuring stability and a smooth ride. In addition to a smooth driving experience, a suspension system also enhances vehicle safety on the road. 

Therefore, follow the suspension system maintenance tips to better look after the component. Moreover, watch out for the causes of car suspension damage and avoid them at all times.

Besides, modern vehicles come with advanced suspension system types such as an independent rear suspension system among others. If your car’s suspension often encounters issues, it is better to go for a change of vehicle. Browse through these used cars for sale in the UAE and have your pick.

Stay connected with dubizzle’s auto blog to learn the ways to reduce car suspension bounce and more.


All About Skid Plates

skid plates

  • Understanding Plates
  • Types
  • Who Needs It
  • How to Choose
  • FAQs

Off-roading vehicles are built tougher than conventional vehicles as they require additional strength to manoeuvre around tough terrains. Amidst a number of additional driving and safety features, skid plates hold a significant position. Skid plates are positioned underneath the engine bay to protect major car components. 

Let’s take a closer look at the skid plates, their uses and what they bring to the table for the off-roaders. 

Understanding Skid Plates

An off-road vehicle can cross rough terrain, which includes sharp rocks, tree branches and ditches. That said, an additional protective layer is required to safeguard the engine, transfer case and other components present beneath the car. This is when a skid plate becomes an essential off-road modification.  

The skid plate is made from a tough metal, generally from aluminium or steel, that works as a shield. Following are some common types of metal compositions used in skid plates. 

  • 1/8th Steel: The 1/8th steel configuration provides enough strength to skid plates and is also cost-effective. 
  • 3/16th Steel: The 3/16th is thicker, making it more durable. These skid plates are capable of bearing the hardest hits.     
  • Aluminium: The aluminium grade skid plates are often proffered for their strength and lightweight. However, the material is more expensive than steel. 
A vehicle off-roading on a rocky terrain
Skid plates work as a shield and protect cars from damage while off-roading on rough terrain

Types of Skid Plates

Now that you are aware of how skid plates work, let’s move towards different types of skid plates used in vehicles designed for off-roading adventures. 

Front Centre Skid Plates

The front centre skid plate is positioned at the front of the vehicle from the front of the bumper. It protects the car’s radiator, main frame, hoses and the engine. The front centre plates are generally made from 1/8th steel and weigh around 16 kg, contributing less to the overall weight of the car. Moreover, the front centre skid plates use a bolt system which makes it easy to install and uninstall. 

Full Belly Skid Plates

As evident from the name, the full belly skid plates cover the whole body, providing additional protection. It covers from bumper to bumper, protecting all the components, including the engine bay and axles. Since vehicles come in different shapes and sizes, full belly skid plates need to be customised for each vehicle. Furthermore, it is more difficult to install and uninstall full belly plates. 

Front Suspension Skid Plates

The front suspension skid plates are specifically designed to protect the car’s suspension system. The protective layer works as a barrier against debris, rock and other materials that can damage the suspension while off-roading. 

Who Needs Skid Plates

Skid plates are a must-have for all off-roaders; besides, skid plates can also be used in other vehicles. 

  • Lower Height Cars: Vehicles with lower height are close to the road and are more prone to damage in case of an accident. That said, a skid plate is necessary to protect the car from unnecessary damage. 
  • Sports Car: Sports cars are lower in height and have higher agility, exposing them to pebbles, dust and road debris. All of these components can cause significant damage to car components. 
  • SUVs: SUVs that are frequently used for mild off-roading also need an additional protective layer. 

How to Choose Skid Plates

Choosing an appropriate skid plate according to the terrain is necessary to avoid causing additional strain on the vehicle. Here is how to choose a skid plate according to the type of terrain. 

  • Rocky, Gravel and Dirt Terrain: These types of terrain are rough and have rocks and other types of debris, making vehicles prone to damage. Therefore, while off-roading or overlanding on these terrains, durable skid plates are required regardless of their weight. 
  • Sandy, Muddy, Clay Terrain: In such terrain, cars need more throttle power and therefore, overall vehicle weight should be less. That said, in these terrains, lighter skid plates are preferred. 
A mechanic checking the car for skid plate installation
It is necessary to take the proper measurement of the car and customise the skid plate for a proper fit


What is the use of a skid plate?

Skid plates are used to protect the car components present underneath the engine bay, which includes the transmission, axle, oil pan, radiator and others. 

Are skid plates worth it?

Yes, skid plates are worth it if you are a regular off-roader. Off-roading without a skid plate can cause serious damage to the vehicle that will cost you a fortune to repair. 

Can skid plates cause overheating?

Skid plates are not directly related to overheating, but they can be a reason for overheating. The plates will cause overheating when it is not installed properly; dirt and debris accumulate in them or are not of the proper size. 

Can skid plates damage my car?

Skid plates accumulate dust and debris while off-roading, and if not cleaned on time, they can cause wear and tear to the vehicle. 

This was all about skid plates and their significance in off-roading vehicles. For off-roading, a different set of vehicles are required that have stronger engines, rugged exteriors, durable transmissions and many other features. If you are planning an off-roading trip, you can also learn about auto lift kits that help increase the vehicle profile. Browse through these used cars for sale in the UAE and choose an off-roader from an array of options. 

Besides, here are some off-roading trails near Dubai that you can visit for a thrilling experience. 

Stay tuned to dubizzle’s auto blog for more information on off-roading car essentials.  


Methods for Reducing Moisture Inside a Car

You can use these tips for Reducing Moisture Inside a Car

  • Causes
  • Methods and Tips
  • FAQs

Whether it’s the rainy season or high humidity, excess moisture inside your car can lead to unpleasant odours, foggy windows and even potential damage to the interior. Fortunately, there are several practical methods to tackle this issue. Let’s explore effective methods of reducing moisture inside your car and provide step-by-step instructions on how to implement them. However, before that, we first explore what causes moisture inside a car. 

What Causes Moisture Inside a Car

Moisture inside your car can be an unwelcome companion and damage your car upholstery. Before tackling the issue, it’s essential to identify the root causes of moisture inside your car. Weather conditions, condensation, leaks and wet items are common culprits. Recognising these factors will help you address the problem at its source.

Weather Conditions

Moisture can infiltrate your car’s interior due to external factors like rain, snow and elevated humidity levels. Though it is impossible to control the weather, taking proactive measures can minimise the impact of these conditions on your car’s interior. However for hot weather. here is how you can prepare your car for hot weather.


there are several Methods for Reducing Moisture Inside a Car
You must check the causes of moisture inside the car

Fluctuations in temperature between the inside and outside of your car often result in condensation on windows and surfaces. This common phenomenon, especially during varying temperatures, requires a strategic approach to effectively manage condensation and maintain a dry interior.


Water can seep into your car through leaky windows, windshields, sunroofs or damaged door seals. Examine your vehicle for potential leaks to promptly address any issues that arise. This is crucial to prevent moisture accumulation. 

Wet Footwear and Clothing

Introducing moisture into your car is inevitable when entering with wet shoes or clothing. Remain mindful of what you bring into your vehicle and promptly remove damp items. This can significantly reduce the risk of excess humidity buildup in the interior.

Reducing Moisture Inside a Car: Methods and Tips

Let’s find out the steps for reducing moisture inside a car.

Ventilation and Air Circulation

Proper ventilation is key to reducing moisture inside your car. Stagnant air can contribute to moisture accumulation, leading to an environment conducive to mould and mildew growth. Here’s how you can improve ventilation:

  • Use the Ventilation System: Turn on your car’s ventilation system to circulate fresh air. Ensure the setting is on fresh air rather than recirculating cabin air.
  • Crack Windows: When parked, crack open the windows slightly to allow for air exchange. This simple step can significantly reduce the buildup of moisture inside the car.
  • Sunroof Ventilation: If your car has a sunroof, open it to increase air circulation. However, be mindful of weather conditions to avoid rain entering the car. Here are some pros and cons of panoramic sunroof that can help you in understanding how to use it.

Also, make sure your car heater is working properly to keep the windows clear and frost-free.

Desiccants and Moisture Absorbers

must check the condensation inside car overnight
You can extend the life of your vehicle’s interior by reducing moisture inside a car

Desiccants are substances that absorb moisture from the air and they can be effective in combating excess humidity inside your car. Common desiccants include silica gel, activated charcoal and commercial moisture-absorbing products. Here’s how to use them:

  • Silica Gel Packets: Place silica gel packets inside your car, such as on the dashboard, seats or in the glove compartment. Replace them when they become saturated.
  • Activated Charcoal: Similarly, activated charcoal can absorb moisture and neutralise odours. Place charcoal pouches in areas prone to moisture buildup.
  • Commercial Moisture Absorbers: Consider using commercial moisture-absorbing products specifically designed for cars. These often come in the form of bags or containers that can be placed in various locations throughout the vehicle.

Regular Cleaning and Maintenance

Maintaining a clean and dry interior is crucial for preventing moisture-related issues. Regular cleaning helps eliminate sources of moisture and prevents the growth of mould and mildew. Follow these steps:

  • Clean Spills Promptly: keep your car clean for instance, if you spill liquids inside your car, clean them up promptly to prevent moisture absorption into the carpet and upholstery.
  • Remove Wet Items: Avoid leaving wet items, such as umbrellas, towels or clothing, inside the car. Remove them as soon as possible.
  • Use Moisture-Resistant Seat Covers: Consider using moisture-resistant seat covers to protect the upholstery from spills and dampness.

Other Ways of Reducing Moisture Inside a Car

Lift the carpet in the back to check moisture inside a car
You can use car AC to reduce moisture inside a car

You can also follow these tips to know how to remove condensation inside a car.

Verify for Leaks

Inspect your car for leaks, especially in the trunk or boot. Lift the carpet in the back to check for water accumulation. Detect and fix leaks that often originate from damaged seals. This is crucial for dry interior maintenance. 

Utilise Air Conditioning

Most people associate air conditioning with cooling, but it’s also an effective tool for reducing moisture. Turn on the air conditioner even on cool days to eliminate water vapour from the air inside your car. Gradually increase the temperature to ensure the air dries up, preventing condensation on the windows. You can also use these tips to get maximum cooling from your car AC and reduce moisture inside your car.

Use the Recirculation Feature Sparingly

The air recirculation feature can be beneficial in hot weather, circulating cooler air within the car. However, use it sparingly to allow fresh air into the vehicle, preventing stale air and excess moisture buildup.

Sanitise the Glass

Ensure windows and sunroofs are properly closed to keep moisture out. Regularly clean and sanitise glass surfaces to prevent fogging, ensuring clear visibility while driving. Here are some useful tips to remove fog from a car’s windshield for clearer view.

Dry the Upholstery and Seats

Combat excess moisture with baking soda. Open boxes of baking soda inside the car with windows and doors shut to absorb moisture. Avoid sprinkling baking soda directly on surfaces, as it may damage your vehicle.

Put Your Car in the Garage

Parking your car in a garage protects it from storms and helps maintain a drier environment. Ensure the garage door is open to allow moist air to escape, preventing the car from sweating.


How to prevent condensation on the inside of car windows?

You must ensure proper ventilation by using your car’s defrost setting, opening windows or using air conditioning. Also, use an anti-fog product or defoggers in the car to minimise condensation.

Why is my car wet inside?

Possible causes include leaks from damaged seals, sunroofs or windows. Regularly inspect and address leaks promptly to prevent moisture buildup. Also, clean car’s sun visor which can get dirty due to moisture inside the car.

How to stop condensation inside the car when parked?

  • Leave windows open slightly to allow air circulation.
  • Use moisture-absorbing products like silica gel or activated charcoal inside the car.
  • Consider placing a moisture-absorbing bag on the dashboard.

This is all about how to remove moisture from inside the car. Moisture inside your car is a common challenge, but with these practical methods, you can reduce humidity and enjoy a clear view while driving. Stay proactive, especially during changing weather conditions, to ensure a dry, moisture-free vehicle and a more comfortable driving experience. 

Whether it’s employing natural remedies or utilising your car’s features, taking these steps will help you conquer moisture-related challenges and maintain a dry, pleasant interior.

If you are buying a used car in the UAE for the first time make sure you don’t leave it with moisture and fog inside. It not only damages your car’s interior but also causes bad odour inside your car. However, here is how you can combat bad odours inside your car. 

Stay in touch with dubizzle’s car blog and find more tips on how to keep your car in good condition.


Everything About Ignition Control Module

ignition control module

The ignition control module holds a paramount position amidst the other parts of an internal combustion engine. It is the brain that controls the ignition timing and spark generation, enabling the air-fuel mixture to burn. That said, without an ignition control module, the proper ignition will be impossible, resulting in inefficient engine performance. Moreover, it will also disrupt the fuel consumption of a vehicle. 

Let’s dive a little deeper and dissect the working, types and other details regarding the ignition control module. 

How Does an Ignition Control Module Work

The ignition control module is the part of the car’s ignition system that is responsible for generating a spark, igniting fuel inside combustion chambers and starting the vehicle. In the ignition system, a number of components work in synchronisation, including the ignition control module. 

Amidst these components, the function of ignition of the ignition control module is to generate spark and control ignition timing. In the first step, the module receives information regarding the engine’s rotational speed and position. The information is collected and transferred through different car sensors, including crankshaft position sensors. 

After processing the information, the ignition control module signals the ignition coil to generate high-voltage current and distribute it to the spark plug. The spark plug is then used to ignite the air-fuel mixture inside the combustion chamber. 

Ignition Control Modules Types

Now that you are aware of the functions of an ignition control module, let’s move toward the different types used in cars. 

Mechanical Ignition Control Module

The mechanical ignition control module is the earliest form of module used in cars. As evident from the name, these modules were mechanically operated and used points and different components to generate electrical signals. That said, the involvement of too many mechanical parts makes it prone to wear and tear. Moreover, it also requires regular maintenance to ensure smooth functioning. 

Electrical Ignition Control Module

Since there have been multiple issues with the mechanical ignition module, it was replaced with the electrical one. The electrical module system uses solid-state electronics to signal the ignition coil. That said, the electrical module consists of an integrated circuit, transistors, capacitors and other components to manage the ignition system. 

Contrary to the mechanical one, the electrical module is more reliable, durable, efficient and provides precise information, resulting in better engine performance. 

Electrical ignition control module
Two different types of ignition control modules are present in the cars. Generally, modern cars have an electrical ignition module

Bad Ignition Control Module Symptoms

In case of an ignition module failure, the engine dies and will not restart. However, the failure of the ignition module is generally caused due to overheating and is often misdiagnosed. Following are some common symptoms that indicate a malfunctioning ignition control module. 

Engine Stalling & Misfiring

The first symptom of a failing ignition control module is engine stalling and misfiring which indicates incomplete combustion. Moreover, it will also cause difficulty in acceleration; the car will start shaking or jerking whenever the accelerator pedal is pressed. 

Dead Engine

The car starts for a second and then dies is another common symptom of a failing ignition module. In some cases, the engine will be completely dead and will take several attempts to restart. It generally happens due to the corroded electrical connections of the ignition module. It can be fixed by cleaning the connection, repairing the switch, or replacing the wires, if needed. 

Engine Check Light Illuminated

The check engine light is illuminated when the ignition module malfunctions. However, the engine check light can be illuminated due to multiple other reasons. To identify the potential cause of the light turning on, you can use the OBD Scanner. 

Ignition Control Module Test

Once your vehicle starts showing the above-mentioned symptoms, it’s recommended to get your ignition control module replaced. However, you can also check its functioning at home prior to visiting the mechanic. Here are the steps to test a bad ignition control module at home. 

  • Step 1: Locate the ignition module; it is generally present near the distributor. If you are unable to find it, refer to the wiring diagram present in the user manual.
  • Step 2: Unscrew and remove the cover over the ignition control module. 
  • Step 3: Now connect one lead to the ignition control module and the other one to the spark tester.
  • Step 4: Crank the engine; if the control module is working properly, the spark tester will light up. 
A mechanic testing ignition control module in a car
To test the ignition control module, basic knowledge about the car engine and its components is necessary


How does an ignition control module work?

The ignition control module receives signals about the engine position and displacement from different sensors. The module used this information to signal the coil to generate the required voltage, transfer it to each spark plug and generate a spark inside the chambers. 

Where is the ignition control module located?

The ignition coil is generally located next to the distributor. If not, then please refer to the user manual.

How much does it cost to repair an ignition control module?

The price to repair the ignition control module varies from vehicle to vehicle. However, an ignition module typically ranges between AED 60 to AED 630, excluding installation charges. 

This was all about the ignition control module and its importance in an internal combustion engine car. The ignition control module is a significant part of the combustion engines and its malfunctioning car causes serious troubles. Although, these parts are generally durable and do not malfunction too often. That said, if your ignition system malfunctions regularly, it might highlight some underlying issues. Rather than investing in repairing, it is suggested to browse through these used cars for sale in the UAE and upgrade to the latest one. 

Stay tuned to dubizzle’s auto blog for more information on the car’s ignition system.